Mustang Squeeze Tools
Mustang squeeze tools are designed to control the flow of gas and water inside a polyethylene pipe when a valve is not practical or available. The controlled rate of squeeze and release, with physical gap stops, prevents damage to the pipe. Squeezing provides a practical way to control the flow of product, to be able to cut and work on HDPE pipe.
Manual Squeeze Tools
A complete line of ruggedly built, manually actuated tools for squeezing PE pipe sizes ranging from ½” CTS to 8” IPS.
DBS-10A
IPS Size: 1/2", 3/4", 1"
CTS Size: 1/2", 3/4", 1", 1 1/4"
DBS-11A
IPS Size: 1/2" & 3/4"
CTS Size: 1/2",3/4", 1"
DBS-20C
IPS Size: 1/2", 3/4", 1", 1 1/4", 1 1/2", 2"
CTS Size: 1/2", 3/4", 1", 1 1/4"
DBS-24C
IPS Size: 1/2", 3/4", 1", 1 1/4", 1 1/2", 2"
CTS Size: 1/2", 3/4", 1", 1 1/4"
DBS-40F
IPS Size: 1", 1 1/4", 1 1/2", 2", 3", 4"
CTS Size: None
DBS-44F
IPS SIze: 1", 1 1/4", 1 1/2", 2", 3", 4"
CTS Size: None
DBG-60
IPS Size: 3", 4" & 6"
CTS Size: None
DBGA-80
IPS Size: 3", 4", 6" & 8"
CTS Size: None
GLS-26
IPS Size: 1/2"-2"
CTS Size: 1/2"-2"
Hydraulic Squeeze Tools
To tackle the toughest jobs, when maximum force and precision are required, look no further than Mustang's Heavy-Duty hyraulic tools for 6" to 24" IPS PE Pipe.
DBM-60
IPS Size: 3", 4" & 6"
Hydraulic cylinder provides 41,000 lbs of force directly over the pipe.
DBML-80
IPS Size: 3", 4", 6" & 8"
Hydraulic cylinder provides 41,000 lbs of force to PE pipe up to 8" IPS.
DBH-68E
IPS Size: 3",4 ", 6" & 8"
Two large-bore hydraulic cylinders provide a massive 82,000 lbs of force to the pipe.
DBH-1200B
IPS Size: 6", 8", 10", 12"
Three large-bore hyrdualic cylinders assert 123,000 lbs of force to the pipe.
DBH-1214A
IPS Size" 8" SDR 7 through 16" SDR 9
Designed to address the requirement for a squeeze tool to effectively control the flow in heavy wall PE pipe.
Huskie Steel Squeeze Tools
Small, light and powerful emergency shut-off tools for 2" IPS Schedule 40 coated pipe.
PS-75
Sizes: 3/4" -2" IPS
Hydraulic Pumps
Precisely adminster pressure to hydraulic tools
Model 20A
2-Stage Hand Pump
For use with DBML-60 & DBML-80
Model 25
2-Stage Hand Pump
For use with "H" series squeeze tools.
Tool Saddle Clamps
When additional compressive force is needed for difficult to squeeze PE pipe, Mustang Saddle Clamps are the answer.
SC-40/44
Fits 40/44- SeriesTools
SC-60
Fits 60-Series Tools
SC-80
Fits 80 Series Tools
Static Discharge
Safely channels hazardous static electricity into the ground and away from the work area and crew.
Seg-30
Can be used with all Mustang Squeeze Tools manufactured since 1972.